All kits will be shipped USPS Priority Mail with Insurance
If you would like it shipped another way please fill out the
If you are out of the USA's lower 48 States you must fill out the IWTP
Arthur R. Warner Co.
KITS:Ready-to-use• Inserts and holders are made by Arthur R. Warner Co.• All components are 100% Made in America• Carbide inserts are availableInserts:• T-15 HSS Rc 65-67 • Finish ground on all surfaces Toolholders:• 4140/4142 Steel Rc 52-54 • CNC machined • Black Oxide CoatingMade by Arthur R. Warner Co.
Specialists in High Speed Steel¼ Turning (T)Item Number K01$115.00
Item Number K01$115.00Contains five bars:.250” shank3.50” overall length
.250” shank3.50” overall lengthContains six T-15 High Speed Steel TPMW-1.8-1.5-1 inserts:
11° positive, .218 IC, .093 thick, .100 hole, .130 top opening, .015 radius
Contains six MS-1152 screws and one T-7 wrench
Additional Inserts are available:
TPMW-1.8-1.5-.5and TPMW-1.8-1.5-1
and TPMW-1.8-1.5-11-9 pieces $6.50 / each, 10 pieces $6.00 / each
This page was last updated: March 24, 2012
Made by Arthur R. Warner Co.
Specialists in High Speed Steel¼ Turning (C) R.H.Item Number K02$57.00
Item Number K02$57.00Contains one bar:.250” shank, 3.50” overall length
.250” shank, 3.50” overall lengthContains three T-15 High Speed Steel CCMW-2-1.5-1 inserts:
7° positive, .250 IC, .093 thick, .110 hole, .146 top opening , .015 radius
Contains two MS-1153 screws and one T-7 wrench
Additional Inserts are available:
CCMW-2-1.5-.5, CCMW-2-1.5-1 and CCMW-2-1.5-2
1-9 pieces $6.25 / each, 10 pieces $5.67 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel¼ Turning (C) R.H. B.B.Item Number K03$105.00
Item Number K03$105.00Contains one bar:.250” shank, 3.50” overall length
.250” shank, 3.50” overall lengthContains one bar:.375” shank, 5.0” overall length
.375” shank, 5.0” overall lengthContains two T-15 High Speed Steel CEMW-2-1.5-1 inserts:
20° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains two T-15 High Speed Steel CCMW-2-1.5-1 inserts:
7° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains two MS-1152S screws, two MS-1153 screws and one T-7 wrench
Additional Inserts are available:
CCMW-2-1.5-.5, CCMW-2-1.5-1, CCMW-2-1.5-2, and CEMW-2-1.5-1
1-9 pieces $6.25 / each, 10 pieces $5.67 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel¼ Turning (C) R.H. L.H. B.B.Item Number K04$128.00
Item Number K04$128.00Contains two bars:.250” shank,3.50” overall length
.250” shank,3.50” overall lengthContains one bar:.375” shank, 5.0” overall length
.375” shank, 5.0” overall lengthContains two T-15 High Speed Steel CEMW-2-1.5-1 inserts:
20° positive, .250 IC, .093 thick, .110 hole, .146 top opening , .015 radius
Contains three T-15 High Speed Steel CCMW-2-1.5-1 inserts:
7° positive, .250 IC, .093 thick, .110 hole, .146 top opening , .015 radius
Contains two MS-1152S screws, four MS-1153 screws and one T-7 wrench
Additional Inserts are available:
CCMW-2-1.5-.5, CCMW-2-1.5-1, CCMW-2-1.5-2, and CEMW-2-1.5-1
1-9 pieces $6.25 / each, 10 pieces $5.67 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Turning (T)Item Number K05$120.00
Item Number K05$120.00Contains five bars:.375” shank, 3.50” overall length
.375” shank, 3.50” overall lengthContains six T-15 High Speed Steel TPMW-222 inserts:
11° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .031 radius
Contains six MS-1153 screws and one T-7 wrench
Additional Inserts are available:
TPMW-221 and TPMW-222
1-9 pieces $6.25 / each, 10 pieces $5.88 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Turning (C) R.H.Item Number K06$60.00
Item Number K06$60.00Contains one bar:.375” shank, 3.50” overall length
.375” shank, 3.50” overall lengthContains three T-15 High Speed Steel CCMW-2-1.5-1 inserts:
7° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains two MS-1153 screws and one T-7 wrench
Additional Inserts are available:
CCMW-2-1.5-.5, CCMW-2-1.5-1 and CCMW-2-1.5-2
1-9 pieces $6.25 / each, 10 pieces $5.67 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Turning (C) R.H. B.B.Item Number K07$110.00
Item Number K07$110.00Contains one bar:.375” shank, 3.50” overall length
.375” shank, 3.50” overall lengthContains one bar:.375” shank, 5.0” overall length
.375” shank, 5.0” overall lengthContains two T-15 High Speed Steel CEMW-2-1.5-1 inserts:
20° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains two T-15 High Speed Steel CCMW-2-1.5-1 inserts:
7° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains two MS-1153, two MS-1152S screws and one T-7 wrench
Additional Inserts are available:
CCMW-2-1.5-.5, CCMW-2-1.5-1, CCMW-2-1.5-2, and CEMW-2-1.5-1
1-9 pieces $6.25 / each, 10 pieces $5.67 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Turning (C) R.H. L.H. B.B.Item Number K08$130.00
Item Number K08$130.00Contains two bars:.375” shank, 3.50” overall length
.375” shank, 3.50” overall lengthContains one bar:.375” shank, 5.0” overall length
.375” shank, 5.0” overall lengthContains two T-15 High Speed Steel CEMW-2-1.5-1 inserts:
20° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains three T-15 High Speed Steel CCMW-2-1.5-1 inserts:
7° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains four MS-1153, two MS-1152S screws and one T-7 wrench
Additional Inserts are available:
CCMW-2-1.5-.5, CCMW-2-1.5-1, CCMW-2-1.5-2, and CEMW-2-1.5-1
1-9 pieces $6.25 / each, 10 pieces $5.67 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Turning (T)Item Number K09$128.00
Item Number K09$128.00Contains five bars:.500” shank, 4.0” overall length
.500” shank, 4.0” overall lengthContains six T-15 High Speed Steel TPMB-322 inserts:
11° positive.375 IC, .125 thick, .125 hole, .250 top opening, .031 radius
.375 IC, .125 thick, .125 hole, .250 top opening, .031 radius Contains six 4-40 FH screws and one 1/16 hex wrench
Additional Inserts are available:
TPMB-321 and TPMB-322
1-9 pieces $6.50 / each, 10 pieces $6.03 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Turning (C) R.H.Item Number K10$65.00
Item Number K10$65.00Contains one bar:.500” shank, 4.0” overall length
.500” shank, 4.0” overall lengthContains three T-15 High Speed Steel CCMW-3-2.5-2 inserts:
7° positive, .375 IC, .156 thick, .173 hole, .236 top opening, .031 radius
Contains two MS-1155 screws and one T-15 wrench
Additional Inserts are available:
CCMW-3-2.5-.5, CCMW-3-2.5-1 and CCMW-3-2.5-2
1-9 pieces $6.50 / each, 10 pieces $5.99/ each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Turning (C) R.H. L.H.Item Number K11$100.00
Item Number K11$100.00Contains two bars:.500” shank, 4.0” overall length
.500” shank, 4.0” overall lengthContains five T-15 High Speed Steel CCMW-3-2.5-2 inserts:
7° positive, .375 IC, .156 thick, .173 hole, .236 top opening, .031 radius
Contains fourMS-1155 screws and one T-15 wrench
Additional Inserts are available:
CCMW-3-2.5-.5, CCMW-3-2.5-1 and CCMW-3-2.5-2
1-9 pieces $6.50 / each, 10 pieces $5.99/ each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Boring Bar (T)Item Number K12$75.00
Item Number K12$75.00Contains one bar:.375” shank, 5.0” overall length
.375” shank, 5.0” overall lengthContains three T-15 High Speed Steel TPMW-1.8-1.5-.5 inserts:
11° positive, .218 IC, .093 thick, .100 hole, .130 top opening, .008 radius
Contains three MS-1152 screws and one T-7 wrench
Additional Inserts are available:
TPMW-1.8-1.5-.5 and TPMW-1.8-1.5-1
1-9 pieces $6.50 / each, 10 pieces $6.00 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Boring Bar (C)Item Number K13$75.00
Item Number K13$75.00Contains one bar:.375” shank, 5.0” overall length
.375” shank, 5.0” overall lengthContains three T-15 High Speed Steel CEMW-2-1.5-1 inserts:
20° positive, .250 IC, .093 thick, .110 hole, .146 top opening, .015 radius
Contains two MS-1152S screws and one T-7 wrench
Additional Inserts are available:
CEMW-2-1.5-1
1-9 pieces $6.25 / each, 10 pieces $5.67 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Boring Bar (T)Item Number K14$80.00
Item Number K14$80.00Contains one bar:.500” shank, 6.0” overall length
.500” shank, 6.0” overall lengthContains three T-15 High Speed Steel TPMW-221 inserts:
11° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .015 radius
Contains two MS-1153 screws and one T-7 wrench
Additional Inserts are available:
TPMW-221 and TPMW-222
1-9 pieces $6.25 / each, 10 pieces $5.88 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel35° Profile (V)Item Number K15$85.00
Item Number K15$85.00Contains one bar:.375” shank, 6.0” overall length
.375” shank, 6.0” overall lengthContains two T-15 High Speed Steel VCMW-221 inserts:
7° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .015 radius
Contains one Carbide VCMT-221 insert
7° positive, .250 IC, .125 thick, .110 hole, .146 top opening,
.015 radius chip breaker
Contains two MS-1153 screws and one T-7 wrench
Additional Inserts are available:
VCMW-22.5, VCMW-221 and VCMW-222
1-9 pieces $8.60/ each, 10 pieces $7.96 / each
CARBIDE VCMT-221
1-9 pieces $8.60/ each, 10 pieces $7.96 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel35° Profile (V) R.H. L.H.Item Number K16$110.00
Item Number K16$110.00Contains two bars:.375” shank, 6.0” overall length
.375” shank, 6.0” overall lengthContains three T-15 High Speed Steel VCMW-221 inserts:
7° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .015 radius
Contains one Carbide VCMT-221 insert
7° positive, .250 IC, .125 thick, .110 hole, .146 top opening,
.015 radius chip breaker
Contains three MS-1153 screws and one T-7 wrench
Additional Inserts are available:
VCMW-22.5, VCMW-221 and VCMW-222
1-9 pieces $8.60/ each, 10 pieces $7.96 / each
CARBIDE VCMT-221
1-9 pieces $8.60/ each, 10 pieces $7.96 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Threader (NV)Item Number K17$85.00
Item Number K17$85.00Contains one bar:.375” shank, 4.50” overall length
.375” shank, 4.50” overall lengthContains one T-15 High Speed Steel TNMC-32NV insert:
.375 IC, .125 thick, .150 hole
Contains one T-15 High Speed Steel TPMC-32NV insert:
.375 IC, .125 thick, .150 hole
Contains two 6-32 FH screws and one 5/64 hex wrench
Additional Inserts are available:
TNMC-32NV
1-10 pieces $11.64 / each
TPMC-32NV
1-10 pieces $12.68 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Threader (NV)Item Number K18$85.00
Item Number K18$85.00Contains one bar:.500” shank, 5.0” overall length
.500” shank, 5.0” overall lengthContains one T-15 High Speed Steel TNMC-32NV insert:
.375 IC, .125 thick, .150 hole
Contains one T-15 High Speed Steel TPMC-32NV insert:
.375 IC, .125 thick, .150 hole
Contains two 6-32 FH screws and one 5/64 hex wrench
Additional Inserts are available:
TNMC-32NV
1-10 pieces $11.64 / each
TPMC-32NV
1-10 pieces $12.68 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Threader (T) Laydowntem Number K19$81.00
tem Number K19$81.00Contains one bar:.375” shank, 5.0” overall length
.375” shank, 5.0” overall lengthContains three T-15 High Speed Steel TPMW-1.8-1.5-.5 inserts:
11° positive, .218 IC, .093 thick, .100 hole, .130 top opening, .008 radius
Contains two MS-1152S screws and one T-7 wrench
Additional Inserts are available:
TPMW-1.8-1.5-.5 and TPMW-1.8-1.5-1
1-9 pieces $6.50 / each, 10 pieces $6.00 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Threader (T) LaydownItem Number K20$81.00
Item Number K20$81.00Contains one bar:.500” shank, 6.0” overall length
.500” shank, 6.0” overall lengthContains three T-15 High Speed Steel TPMW-221 inserts:
11° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .015 radius
Contains two MS-1153 screws and one T-7 wrench
.
Additional Inserts are available:
TPMW-221 and TPMW-222
1-9 pieces $6.25 / each, 10 pieces $5.88 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Cutoff - Groover RHItem Number K21$90.00
Item Number K21$90.00Contains one right hand bar:.375” shank, 4.50” overall length
.375” shank, 4.50” overall lengthContains two 1/16 Groover (.062”) T-15 High Speed Steel inserts
Contains two 1/32 Groover (.031”) T-15 High Speed Steel inserts
Contains one 1/64 Groover (.015”) T-15 High Speed Steel inserts
Contains two IS 3007 screws and one T-9 wrench
Additional Inserts are available:
1/64 Groover (.015”), 1/32 Groover (.031”), 1/16 Groover (.062”) and 1/8" Groover (.125")
60 deg. threading inserts available now
1-10 pieces $10.00 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Cutoff - Groover Left and RightItem Number K24$128.00
Item Number K24$128.00Contains one bar:.500” shank, 4.50” overall length
.500” shank, 4.50” overall lengthContains one 1/16 Groover LH (.062”) T-15 High Speed Steel insert
Contains one 1/32 Groover LH (.031”) T-15 High Speed Steel insert
Contains one 1/64 Groover LH (.015”) T-15 High Speed Steel insert
Contains one 1/16 Groover RH (.062”) T-15 High Speed Steel insert
Contains one 1/32 Groover RH (.031”) T-15 High Speed Steel insert
Contains one 1/64 Groover RH (.015”) T-15 High Speed Steel insert
Contains three IS 3007 screws and one T-9 wrench
Additional Inserts are available:
1/64 Groover (.015”), 1/32 Groover (.031”), 1/16 Groover (.062”) and 1/8" Groover (.125")
60 deg. threading inserts available now
1-10 pieces $10.00 / each
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/8 Cutoff - Groover LHItem Number K22$90.00
Item Number K22$90.00Contains one left hand bar:.375” shank, 4.50” overall length
.375” shank, 4.50” overall lengthContains one 1/16 Groover (.062”) T-15 High Speed Steel inserts
Contains two 1/32 Groover (.031”) T-15 High Speed Steel inserts
Contains one 1/64 Groover (.015”) T-15 High Speed Steel inserts
Contains two IS 3007 screws and one T-9 wrench
Additional Inserts are available:
1/64 Groover (.015”), 1/32 Groover (.031”), 1/16 Groover (.062”) and 1/8" Groover (.125")
60 deg. threading inserts available now
1-10 pieces $10.00 / each
NEW ITEM
No Picture at This Time
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/2 Cutoff - Groover RHItem Number K23$105.00
Item Number K23$105.00Contains one left hand bar:.375” shank, 4.50” overall length
.375” shank, 4.50” overall lengthContains two 1/16 Groover RH (.062”) T-15 High Speed Steel insert
Contains two 1/32 Groover RH (.031”) T-15 High Speed Steel insert
Contains one 1/64 Groover RH (.015”) T-15 High Speed Steel insert
*Each insert has two cutting edges
Contains two IS 3007 screws and one T-9 wrench
Additional Inserts are available:
1/64 Groover (.015”), 1/32 Groover (.031”), 1/16 Groover (.062”) and 1/8" Groover (.125")
60 deg. threading inserts available now
1-10 pieces $10.00 / each
NEW ITEM
No Picture at This Time
Made by Arthur R. Warner Co.
Specialists in High Speed Steel1/4" Cutoff - Groover RHItem Number K25$98.50
Item Number K25$98.50Contains one bar:.375” shank, 4.50” overall length
.375” shank, 4.50” overall lengthContains two 1/16 Groover (.062”) T-15 High Speed Steel inserts
Contains two 1/32 Groover (.0315”) T-15 High Speed Steel inserts
Contains one 1/64 Groover (.015”) T-15 High Speed Steel inserts
Contains two IS 3007 screws and one T-9 wrench
Additional Inserts are available:
1/64 Groover (.015”), 1/32 Groover (.031”), 1/16 Groover (.062”) and 1/8" Groover (.125")
60 deg. threading inserts available now
1-10 pieces $10.00 / each
No Picture at This Time
NEW ITEM
Made by Arthur R. Warner Co.
Specialists in High Speed Steel5/16" Cutoff - Groover Item Number K27$65.00
Item Number K27$65.00Contains one bar:5/16" shank, 3.0” overall length
5/16" shank, 3.0” overall lengthContains one T-15 High Speed Steel .062" x 3.0" cut-off blade.
Contains one 7/64" wrench
Additional blades are available:
.032" wide cut off bladeNo Picture at This Time
NEW ITEM
Made by Arthur R. Warner Co.
Specialists in High Speed Steel3/16" Turning (C) R.H.Item Number K26$45.00
Item Number K26$45.00Contains one bar:3/16” shank, 3.50” overall length
3/16” shank, 3.50” overall lengthContains three T-15 High Speed Steel CEMW-2-1.5-1 inserts:
20° positive, .250 IC, .093 thick, .110 hole, .146 top opening , .015 radius
Contains two CO 2205 S screws and one T-7 wrench
Additional Inserts are available:
No Picture at This Time
NEW ITEM
